TOTOLINK N610RT wireless dual-band router set wired / wireless network connection in one, in line with IEEE 802.11n / a / b / g / n standards, 2.4G / 5.0G concurrent dual-band router, the maximum wireless transfer rate up to 300M (2Tx -2Rx). Using MIMO technology to provide 4 Mbps LAN interfaces, provide better wireless performance, stability, and wireless coverage. Support QOS traffic control functions. Excellent design from Korea, give you a new experience.
Features
- Double your network bandwidth (IEEE 802.11b/g/n 2.4GHz, IEEE 802.11a/n 5GHz)
- Up to 300Mbps data rate for Wi-Fi network
- Support PPPOE, Dynamic IP, and static IP three kinds of broadband access.
- Compliance with IEEE802.11n b/g/n standards
- Support 5GHz, suitable for video transmission
- Supports automatic dialing, on-demand dialing, dialing on time to meet the needs of most users dial.
- Support DDNS, VPN penetration.
- Supports port forwarding, port triggering and DMZ host.
- Support SSID broadcast control and MAC address-based access control.
- Support 64/128-bit WEP encryption, 128 bit WPA standard encryption (TKIP / AES)
- Built-in firewall, support IP filtering, URL filtering and MAC address filtering.
- Built-in DHCP server to automatically assign IP addresses.
- Support IP QOS flow control
- 4 4DBi intelligent omnidirectional antenna is not removable.
- Support WPS a key encryption
- Bottom pinhole vents, enhance heat dissipation
- Graphical LED design, the indicator function of the router at a glance
ToToLink N610RT V5.0 Firmware Download (Include ENGLISH and Chinese)
Version: V5.0
Updated: 2014-05-14
Change logs:
1. Fixed some tiny bugs.
2. Fixed LAN can’t obtain an IP address
3. Fixed wireless connection can’t be sustained.Instructions:
1.Incorrect upgrade will damage your device.
2.Please upgrade your device by cable connections.
3.Do not power off the device when upgrading.
4.Please unzip the file you downloaded and use the file ended with “web” to upgrade your device.
5.After upgrading, please restore it to factory defaults and configure the device again.
