TENDA N630 Wirless Router comes with Latest Tenda English firmware, this English firmware supports multi Repeater mode including Universal repeater mode, WISP mode(Highly recommended) and WDS repeater mode.
Wireless broadband DSL home router+3 repeater mode
Input: 100-240v ~ 50/60Hz 0.3A
Ouput: DC 9v == 600mA
Size(L*W*H)mm: 133 * 87 *24.76
Indicator: Power, SYS,WLAN,WPS,WAN,LAN(1-4)
Wireless Rate: UP To 300Mbps
Working Frequency: 2.4GHZ
Wireless Security: Wireless security function switch; 64/128 bit WEP,WPA-PSK,WPA2-PSK security mechanism;
WAN access: PPPOE,Dynamic IP, Static IP
Operatin mode: WISP Mode, WDS bridging
Protocol Standards: IEEE 802.11n,IEEE 802.11g,IEEE 802.11b; IEEE 802.3,IEEE 802.3u;
Interface: 1 10/100M Adaptive WAN Port support auto-filp(Auto MDI/MDIX)
4 10/100M adaptive LAN Ports Support Auto-filp(Auto MDI/MDIX)
Antenna: 2 x 5dbi High-gain omni-directional antenna
Push Button: 1 Reset/WPS Button multiplexing(holes form)
How to update firmware?
This router also work as home router
You will need to connect it to DSL modem with RJ45 ethernet cable if your internet service is RJ11 cable(Dial-Up)
Step 1: Enter 192.168.0.1 in your internet browser
Step 2: Open Tab "TOOLS" - Upgrade, Open the firmware file and then click Update.
Step 3: Restart&Finish